200 Bottle Wine Cabinets
Two hundred bottles needs 2,000 mm of wall and a decision about whether you are storing or displaying. Most clients do both, split at eye level.
What this one is
One page inside the by size and capacity group — seventeen cases · full wall territory. What follows is how it meets the wall, how the rows are pitched, and what the drawing has to settle before anything is cut.
Where it goes
It stands on the floor, so the plinth carries the load and the wall only has to stop it tipping.
It runs wall to wall, with the last module scribed to the plaster.
It is built with integrated cooling rather than a separate chiller.
Bottle fit and cradle pitch
Capacity for this model runs 200 bottles. If your count sits outside that band, the band moves rather than the room: the module count and the cradle pitch are what change, not the finish or the frame.
Depth is 350 – 450 mm. The measurement that matters is the bottle, not the cabinet: a Burgundy bottle lying forward needs more than a Bordeaux one, and a magnum row needs more again.
What the drawing fixes
Everything on the drawing comes back to four numbers: width 1,800 – 2,700 mm; height 2,400 – 3,200 mm; depth 350 – 450 mm; capacity 200 bottles; lead time 40 – 50 days. Change one of them and it is a different cabinet, drawn again rather than stretched. Full-wall · Floor are the mounting conditions this one is drawn for.
Finish
Any of the 63 codes — see stainless steel finishes — and the lead time behind each one is quoted per project.
- Capacity
- 200 bottles
- Width
- 1,800 – 2,700 mm
- Height
- 2,400 – 3,200 mm
- Depth
- 350 – 450 mm
- Doors
- Multiple modules
- Cooling
- Dual zone, front-vented
- Lead time
- 40 – 50 days
Lead times quoted per project.
More by size and capacity
24 Inch Wine Cabinets
610 mm — the standard US base cabinet bay
View
15 Inch Wine Cabinets
381 mm — narrow bay, full height
View
18 Inch Wine Cabinets
457 mm — the middle of the narrow range
View
Made in our own factory in Shunde, Foshan: frame, finish, cradle and cooling in one workshop. Production runs 30 to 40 days after the deposit and is quoted per project. Crated for your forwarder; installation by your fitter to our drawing.
Before you order a 200 bottle wine cabinets
Will you survey the wall?
For anything over 1,800 mm we ask for photos with a tape measure in frame, and a floor-to-ceiling height at three points. A 10 mm error at 2,700 mm shows.
How is it delivered?
Numbered modules on a crate, with a setting-out drawing. Modules are sized to fit through a standard 800 mm door.
Send the wall, not the wish list
Three photographs and the bottle count is enough for a scheme and a fixed price.