Wine Fridge Cabinets
The joinery and the cooling are one product from one building. No gap between cabinet and fridge, no second supplier to blame, no vent grille on a wall you paid to keep clean.
What this one is
One page inside the head terms group — cabinet and cooling from one factory · 110 v ready. What follows is how it meets the wall, how the rows are pitched, and what the drawing has to settle before anything is cut.
Where it goes
It stands on the floor, so the plinth carries the load and the wall only has to stop it tipping.
It is built into the joinery, flush with the surrounding panels.
It sits under the counter, sized to the run above it.
Bottle fit and cradle pitch
Capacity for this model runs 40 – 260 bottles. If your count sits outside that band, the band moves rather than the room: the module count and the cradle pitch are what change, not the finish or the frame.
What the drawing fixes
Everything on the drawing comes back to four numbers: capacity 40 – 260 bottles; lead time 35 – 45 days. Change one of them and it is a different cabinet, drawn again rather than stretched. Floor · Built-in · Under-counter are the mounting conditions this one is drawn for.
Finish
Any of the 63 codes — see stainless steel finishes — and the lead time behind each one is quoted per project.
- Zones
- Single or dual, independent
- Range
- 5 – 20 °C, ±0.5 °C
- Compressor
- Embraco, front-vented, R600a
- Power
- 110 V / 60 Hz for the US — compressor spec changed for the US market
- Capacity
- 40 – 260 bottles
- Glass
- Double-glazed Low-E, heated perimeter
- Clearance
- Zero at the back — vents front to front through the plinth
- Lead time
- 35 – 45 days
Lead times quoted per project.
More head terms
Wine Storage Cabinets
Closed storage · Glass optional
View
Wine Walls
One continuous run of glass, skirting to ceiling
View
Wine Storage Racks
High-density bottle storage in stainless
View
Made in our own factory in Shunde, Foshan: frame, finish, cradle and cooling in one workshop. Production runs 30 to 40 days after the deposit and is quoted per project. Crated for your forwarder; installation by your fitter to our drawing.
Before you order a wine fridge cabinets
Is the compressor serviceable in the US?
Yes. It is an Embraco unit — a standard part stocked by US refrigeration distributors, not a proprietary one you have to ship back to China.
Does it need space behind it?
No. Air goes in and out through the plinth, so the cabinet sits flush to the wall.
Why 110 V matters
A 220 V compressor wired into a US kitchen is a fire risk and a warranty problem. We fit the US-spec compressor for US orders, and say so on the order.
Send the wall, not the wish list
Three photographs and the bottle count is enough for a scheme and a fixed price.