Wine Walls
Modules that join every 900 mm and read as a single frame. Bottle zones, display zones and closed storage in the same elevation, shipped numbered for your fitter.
What this one is
One page inside the head terms group — one continuous run of glass, skirting to ceiling. What follows is how it meets the wall, how the rows are pitched, and what the drawing has to settle before anything is cut.
Where it goes
It stands on the floor, so the plinth carries the load and the wall only has to stop it tipping.
It runs wall to wall, with the last module scribed to the plaster.
Bottle fit and cradle pitch
Capacity for this model runs 80 – 900 bottles. If your count sits outside that band, the band moves rather than the room: the module count and the cradle pitch are what change, not the finish or the frame.
Depth is 300 – 450 mm. The measurement that matters is the bottle, not the cabinet: a Burgundy bottle lying forward needs more than a Bordeaux one, and a magnum row needs more again.
What the drawing fixes
Everything on the drawing comes back to four numbers: width Unlimited — modules join every 900 mm; height Up to 3,200 mm per module; depth 300 – 450 mm; capacity 80 – 900 bottles; lead time 30 – 45 days. Change one of them and it is a different cabinet, drawn again rather than stretched. Full-wall · Floor to ceiling are the mounting conditions this one is drawn for.
Finish
Any of the 63 codes — see stainless steel finishes — and the lead time behind each one is quoted per project.
- Width
- Unlimited — modules join every 900 mm
- Height
- Up to 3,200 mm per module
- Depth
- 300 – 450 mm
- Capacity
- 80 – 900 bottles
- Join detail
- 6 mm shadow gap on a shared mullion
- Lighting
- 3,000 K or 4,000 K, shelf-integrated, dimmable
- Lead time
- 30 – 45 days
Lead times quoted per project.
More head terms
Wine Storage Racks
High-density bottle storage in stainless
View
Small Wine Cabinets
12 to 60 bottles, without the dead space
View
Wine Storage Ideas
Eleven layouts we actually build
View
Made in our own factory in Shunde, Foshan: frame, finish, cradle and cooling in one workshop. Production runs 30 to 40 days after the deposit and is quoted per project. Crated for your forwarder; installation by your fitter to our drawing.
Before you order a wine walls
Will I see the joins?
Each join is a 6 mm shadow gap on a shared mullion. From a metre away it reads as one frame. We show you the joint detail on the drawing before cutting.
My wall is not straight.
Every unit is templated after the wall is finished and scribed at the factory, so a 20 mm bow goes into the scribe instead of into a filler panel.
Send the wall, not the wish list
Three photographs and the bottle count is enough for a scheme and a fixed price.