Wall-Mounted Wine Racks
Folded stainless cradles fixed to a wall with a hidden cleat. Nothing touches the floor, so the room keeps its full footprint and the bottles read as a graphic on the wall.
What this one is
One page inside the by room and position group — bottles off the floor, wall left intact. What follows is how it meets the wall, how the rows are pitched, and what the drawing has to settle before anything is cut.
Where it goes
It fixes to the wall, which keeps the floor clear and puts the bottles at eye level.
It hangs from the ceiling structure, leaving the floor completely open.
Bottle fit and cradle pitch
Capacity for this model runs 6 – 180 bottles. If your count sits outside that band, the band moves rather than the room: the module count and the cradle pitch are what change, not the finish or the frame.
Depth is 90 / 120 / 300 mm depending on presentation. The measurement that matters is the bottle, not the cabinet: a Burgundy bottle lying forward needs more than a Bordeaux one, and a magnum row needs more again.
What the drawing fixes
Everything on the drawing comes back to four numbers: width 300 – 3,000 mm per section; height Up to 2,800 mm from a single cleat line; depth 90 / 120 / 300 mm depending on presentation; capacity 6 – 180 bottles; lead time 20 – 30 days. Change one of them and it is a different cabinet, drawn again rather than stretched. Wall-mounted · Floating · Ceiling-hung are the mounting conditions this one is drawn for.
Finish
Any of the 63 codes — see stainless steel finishes — and the lead time behind each one is quoted per project.
- Width
- 300 – 3,000 mm per section
- Height
- Up to 2,800 mm from a single cleat line
- Depth
- 90 / 120 / 300 mm depending on presentation
- Capacity
- 6 – 180 bottles
- Fixings
- Hidden cleat, into studs or masonry
- Load
- Up to 45 kg per running metre, fully loaded
- Finish
- Matte black · brushed · champagne gold · bronze
- Lead time
- 20 – 30 days
Lead times quoted per project.
More by room and position
Corner Wine Cabinets
Angled front · No dead triangle
View
Ceiling Wine Racks
Hangs from the slab · Floor stays clear
View
Narrow & Shallow Wine Cabinets
From 260 mm deep · From 300 mm wide
View
Made in our own factory in Shunde, Foshan: frame, finish, cradle and cooling in one workshop. Production runs 30 to 40 days after the deposit and is quoted per project. Crated for your forwarder; installation by your fitter to our drawing.
Before you order a wall-mounted wine racks
Will it pull out of drywall?
Not if it is fixed into studs or into our stainless back rail. We send a fixing plan with the stud spacing marked, and for masonry we supply sleeve anchors.
Label out or neck out?
Both. Label-out shows the wine, neck-out stores more in the same width. Most clients mix: label-out at eye level, neck-out above and below.
Can it be added to later?
Yes. The cleat is continuous and each cradle section bolts on, so a second run can be added without removing the first.
Send the wall, not the wish list
Three photographs and the bottle count is enough for a scheme and a fixed price.