Wine Cellar Doors
The door is where a wine room is judged and where it fails: condensation, sag, draught. Ours is a folded stainless frame with an insulated double-glazed panel, our own top-and-bottom hinge, and a magnetic seal.
What this one is
One page inside the cellar systems group — framed glass · insulated · heated perimeter. What follows is how it meets the wall, how the rows are pitched, and what the drawing has to settle before anything is cut.
Where it goes
It is built to the wall it meets — send the dimensions and we will tell you which of the mounting conditions suits the room.
Bottle fit and cradle pitch
Every row is cut to the bottles it will hold, and the drawing labels which row takes which shape.
What the drawing fixes
Everything on the drawing comes back to four numbers: lead time 25 – 35 days. Change one of them and it is a different cabinet, drawn again rather than stretched. Hinged · Pivot · Sliding are the mounting conditions this one is drawn for.
Finish
Any of the 63 codes — see stainless steel finishes — and the lead time behind each one is quoted per project.
- Types
- Hinged · pivot · sliding · double
- Frame
- 18 – 40 mm stainless, folded
- Glass
- Double-glazed Low-E, 4 + 9 A + 4 mm
- Seal
- Magnetic, full perimeter
- Hinge
- Top-and-bottom, in-house designed, 120 kg per leaf
- Heating
- Low-wattage perimeter heater on the warm side
- Sizing
- Made to the opening, ±1 mm
- Lead time
- 25 – 35 days
Lead times quoted per project.
More cellar systems
Glass Wine Cellars
Four glass walls · One stainless frame
View
Wine Cellar Humidity Control
55 – 75 % RH · Held, not guessed
View
Wine Cellars
Room, walling, door, cooling — one supplier
View
Made in our own factory in Shunde, Foshan: frame, finish, cradle and cooling in one workshop. Production runs 30 to 40 days after the deposit and is quoted per project. Crated for your forwarder; installation by your fitter to our drawing.
Before you order a wine cellar doors
Why does a glass door fog up, and does yours?
Condensation forms when the warm face of the glass drops below the dew point. We fit a heated perimeter on the warm side and wire it to the room light, which keeps the face above dew point without a visible element.
Can I buy the door without the room?
Yes. Door, frame and threshold ship as a kit with a setting-out drawing, and your builder forms the opening.
What about a sliding door on a curved wall?
Only above a 1,500 mm radius. Below that the track cannot follow the curve smoothly and we would use a pivot leaf instead.
Send the wall, not the wish list
Three photographs and the bottle count is enough for a scheme and a fixed price.