Bar Cabinets
A home bar cabinet that holds wine properly and spirits tidily: bottle cradle behind a glass door on one side, glassware and a mixing surface on the other.
What this one is
One page inside the by room and position group — bottles below · glass above · one frame. What follows is how it meets the wall, how the rows are pitched, and what the drawing has to settle before anything is cut.
Where it goes
It stands on the floor, so the plinth carries the load and the wall only has to stop it tipping.
It is built into the joinery, flush with the surrounding panels.
Bottle fit and cradle pitch
Capacity for this model runs 30 – 160 bottles plus glassware. If your count sits outside that band, the band moves rather than the room: the module count and the cradle pitch are what change, not the finish or the frame.
Depth is 450 – 600 mm. The measurement that matters is the bottle, not the cabinet: a Burgundy bottle lying forward needs more than a Bordeaux one, and a magnum row needs more again.
What the drawing fixes
Everything on the drawing comes back to four numbers: width 900 – 3,000 mm; height 900 mm bar height, or 2,100 mm with a hutch; depth 450 – 600 mm; capacity 30 – 160 bottles plus glassware; lead time 30 – 45 days. Change one of them and it is a different cabinet, drawn again rather than stretched. Floor · Bar height · Built-in are the mounting conditions this one is drawn for.
Finish
Any of the 63 codes — see stainless steel finishes — and the lead time behind each one is quoted per project.
- Width
- 900 – 3,000 mm
- Height
- 900 mm bar height, or 2,100 mm with a hutch
- Depth
- 450 – 600 mm
- Capacity
- 30 – 160 bottles plus glassware
- Sections
- Bottle cradle · glass shelf · drawers · open niche
- Lighting
- Shelf-integrated, dimmable, 3,000 K
- Top
- Stainless, or stone by your supplier
- Lead time
- 30 – 45 days
Lead times quoted per project.
More by room and position
Built-In Wine Cabinets
Flush with the wall · Zero clearance
View
Tall Wine Cabinets
Up to 3,200 mm in one frame
View
Wide & Large Wine Cabinets
4,000 mm and beyond, in modules
View
Made in our own factory in Shunde, Foshan: frame, finish, cradle and cooling in one workshop. Production runs 30 to 40 days after the deposit and is quoted per project. Crated for your forwarder; installation by your fitter to our drawing.
Before you order a bar cabinets
Wine and spirits in the same cabinet?
Yes, with separation. Spirits sit upright on glass shelves and wine lies in the cradle, and if any part is cooled it is only the wine side.
Can it include a sink?
Yes, with the plumbing brought to the cabinet before it is set. We cut the waste and supply positions on the drawing so the plumber works to a plan.
Can the glassware hangers be added?
They are part of the hutch, not an afterthought. Stemware hangs from a stainless rail under the shelf and the drop is set to your tallest glass.
Send the wall, not the wish list
Three photographs and the bottle count is enough for a scheme and a fixed price.