Wide & Large Wine Cabinets
Very wide runs built as numbered modules that join on a shared mullion, so a 4 m wall arrives as something two people can carry and an installer can set in a day.
What this one is
One page inside the by room and position group — 4,000 mm and beyond, in modules. What follows is how it meets the wall, how the rows are pitched, and what the drawing has to settle before anything is cut.
Where it goes
It runs wall to wall, with the last module scribed to the plaster.
It is built with integrated cooling rather than a separate chiller.
Bottle fit and cradle pitch
Capacity for this model runs 200 – 900 bottles. If your count sits outside that band, the band moves rather than the room: the module count and the cradle pitch are what change, not the finish or the frame.
Depth is 300 – 450 mm. The measurement that matters is the bottle, not the cabinet: a Burgundy bottle lying forward needs more than a Bordeaux one, and a magnum row needs more again.
What the drawing fixes
Everything on the drawing comes back to four numbers: width 2,000 mm to unlimited, modules join every 900 mm; height Up to 3,200 mm per module; depth 300 – 450 mm; capacity 200 – 900 bottles; lead time 35 – 50 days. Change one of them and it is a different cabinet, drawn again rather than stretched. Full-wall · Multi-module are the mounting conditions this one is drawn for.
Finish
Any of the 63 codes — see stainless steel finishes — and the lead time behind each one is quoted per project.
- Width
- 2,000 mm to unlimited, modules join every 900 mm
- Height
- Up to 3,200 mm per module
- Depth
- 300 – 450 mm
- Capacity
- 200 – 900 bottles
- Joints
- 6 mm shadow gap on a shared mullion
- Cooling
- One unit per 1,200 bottles, or two for redundancy
- Structure
- 1.2 mm folded stainless frame per module
- Lead time
- 35 – 50 days
Lead times quoted per project.
More by room and position
Basement Wine Storage
The steadiest room in the house for wine
View
Over-Fridge Wine Storage
The 400 mm above the fridge
View
Under-Stair Wine Racks
Open racking that follows the rake
View
Made in our own factory in Shunde, Foshan: frame, finish, cradle and cooling in one workshop. Production runs 30 to 40 days after the deposit and is quoted per project. Crated for your forwarder; installation by your fitter to our drawing.
Before you order a wide & large wine cabinets
Will I see where the modules join?
You will see a 6 mm shadow gap, which is deliberate. From a metre away it reads as one continuous frame; without it, the joins wander after a year.
How wide before you need two cooling units?
Around 1,200 bottles. Above that a single unit has to move too much air and the far end of the run drifts a couple of degrees.
Can a wide run follow a wall that is not straight?
Yes, with a scribe. We template after the wall is finished, so a 20 mm bow goes into the scribe instead of into a filler panel.
Send the wall, not the wish list
Three photographs and the bottle count is enough for a scheme and a fixed price.