Skin-Feel Matte Lacquer
Skin-Feel Matte Lacquer is one of the eight stainless finish families we hold in the factory. A 0.3 mm matte film over stainless. It reads as painted timber until you touch it, and then it reads as nothing at all — no gloss, no grain, no metallic flake.
What Skin-Feel Matte Lacquer is
A 0.3 mm matte film over stainless. It reads as painted timber until you touch it, and then it reads as nothing at all — no gloss, no grain, no metallic flake. It is a stainless steel wine cabinet finish, applied in the same workshop that folds the frame, which is why a code and a cabinet can be confirmed on the same drawing.
Where it works
- Modern kitchens with a flat, seamless door front.
- Colour-matching an existing joinery scheme to a RAL code.
- Anywhere the cabinet should disappear into the wall.
Where it does not
- High-traffic corners where a scuff will show as a lighter patch.
- A mirror-finish kitchen — the two sheens fight each other.
Care
Wipe with a damp cloth. Do not use an abrasive cream — matte film shows the polished spot it leaves behind.
The 13 codes in this family
MKF-01 W, MKF-02 L, MKF-03 S, MKF-04 O, MKF-05 C, MKF-06 T, MKF-07 R, MKF-08 H, MKF-09 G, MKF-10 M, MKF-11 A, MKF-12 I, MKF-13 V.
MKF at a glance
- Codes
- 13 (MKF-01 to MKF-13)
- Family
- Skin-Feel Matte Lacquer
- Substrate
- Stainless steel
- Matching
- RAL code, or a physical sample posted to us
- Sample
- Swatch photographs on this page are our own samples
Skin-Feel Matte Lacquer — the full range
How a finished cabinet reaches you
- Made in
- Shunde, Foshan, China — frame, finish and assembly in one workshop
- Frame
- 18 mm stainless sightline, folded to the measured wall
- Materials
- Stainless steel, tempered or low-E glass, felt-lined bottle cradle
- Cooling
- Embraco compressor, 110 V / 60 Hz for the US, 220–240 V elsewhere
- Production
- 30 to 40 days after the 50% production deposit, quoted per project
- Delivery
- Crated, collected by your forwarder, with a numbered setting-out drawing
- Installation
- By your fitter, to our drawing; we dry-fit and inspect before crating
Not sure which family suits the room?
Send a photograph of the space and the joinery it has to sit against. We will come back with two or three codes rather than all 63.