7 surfaces · MKM-01 to MKM-07

Wood-Grain Lacquer

Wood-Grain Lacquer is one of the eight stainless finish families we hold in the factory. Printed grain under lacquer, aligned so the pattern runs continuously across a run of doors instead of restarting at every joint.

Reviewed by Stone Zeng, Export DirectorUpdated Factory Shunde, Foshan

What Wood-Grain Lacquer is

Printed grain under lacquer, aligned so the pattern runs continuously across a run of doors instead of restarting at every joint. It is a stainless steel wine cabinet finish, applied in the same workshop that folds the frame, which is why a code and a cabinet can be confirmed on the same drawing.

Where it works

  • Warm schemes where real timber would move with the humidity.
  • A wine wall next to oak flooring, matched rather than contrasted.
  • Anywhere a timber cradle is already specified.

Where it does not

  • Very wide single panels — printed grain repeats, and the repeat shows over 1,200 mm.

Care

Damp cloth. Avoid solvent — it lifts the print, not just the lacquer.

The 7 codes in this family

MKM-01 L, MKM-02 W, MKM-03 C, MKM-04 F, MKM-05 C, MKM-06 C, MKM-07 R.

MKM at a glance

Codes
7 (MKM-01 to MKM-07)
Family
Wood-Grain Lacquer
Substrate
Stainless steel
Matching
RAL code, or a physical sample posted to us
Sample
Swatch photographs on this page are our own samples
Swatches

Wood-Grain Lacquer — the full range

L MKM-01 — stainless steel wine cabinet finish sampleMKM-01
W MKM-02 — stainless steel wine cabinet finish sampleMKM-02
C MKM-03 — stainless steel wine cabinet finish sampleMKM-03
F MKM-04 — stainless steel wine cabinet finish sampleMKM-04
C MKM-05 — stainless steel wine cabinet finish sampleMKM-05
C MKM-06 — stainless steel wine cabinet finish sampleMKM-06
R MKM-07 — stainless steel wine cabinet finish sampleMKM-07

How a finished cabinet reaches you

Made in
Shunde, Foshan, China — frame, finish and assembly in one workshop
Frame
18 mm stainless sightline, folded to the measured wall
Materials
Stainless steel, tempered or low-E glass, felt-lined bottle cradle
Cooling
Embraco compressor, 110 V / 60 Hz for the US, 220–240 V elsewhere
Production
30 to 40 days after the 50% production deposit, quoted per project
Delivery
Crated, collected by your forwarder, with a numbered setting-out drawing
Installation
By your fitter, to our drawing; we dry-fit and inspect before crating
Custom stainless steel wine cabinet, lit interior
Next step

Not sure which family suits the room?

Send a photograph of the space and the joinery it has to sit against. We will come back with two or three codes rather than all 63.